Flexible Industrial Hose

PVC F-Type Suction Hose is a medium-duty PVC hose reinforced with a continuous PVC helix for selected suction and discharge applications. The hose size, conveyed material, temperature, pressure or vacuum, fittings and installation conditions must be confirmed before use.

PVC Spring Hose is intended for selected water, oil, powder and general material-transfer applications in factories, agriculture and engineering work. The exact media, temperature, pressure or vacuum, hose construction, size, fittings and installation conditions must be confirmed before use.

Fastul R1AT Hydraulic Hose Overview

Fastul R1AT hydraulic hose is a single-wire-reinforced hose for selected hydraulic fluid-power applications. The existing product information identifies DIN EN 853 1SN, a synthetic-rubber tube, one layer of high-tensile steel-wire reinforcement and an abrasion- and ozone-resistant synthetic-rubber cover.

Fastul R2AT Hydraulic Hose Overview

Fastul R2AT hydraulic hose is a two-wire-reinforced hose for selected hydraulic fluid-power applications. The existing product information identifies DIN EN 853 2SN, a synthetic-rubber tube, two layers of high-tensile steel-wire reinforcement and an abrasion- and ozone-resistant synthetic-rubber cover.

High Pressure Jack Hose Overview

High Pressure Jack Hose is listed for compact high-pressure hydraulic lines used with jack and lifting equipment. The published product information identifies a 700 bar application reference, a polyester elastomer inner tube and a black polyurethane cover.

Nitrogen Hose 20 Bar Overview

Nitrogen Hose 20 Bar is an extruded softwall rubber hose listed for transfer of nitrogen gas or natural gas. The published construction uses an NBR/SBR blend tube, yellow NBR/PVC/SBR blend cover and high-tensile synthetic yarn reinforcement.

LPG Hose 20 Bar Overview

LPG Hose 20 Bar is a product listing in Advtech Engineering’s gas hose category. The original description does not publish the exact tube, reinforcement, cover, temperature range, pressure table, standards or approved LPG composition.

Heavy Duty Air Hose 20 Bar Overview

Heavy Duty Air Hose 20 Bar is listed for transfer of compressed air and water in mining, shipyard, civil and building-industry duties. The published construction uses an SBR blend tube, yellow EPDM blend cover and multiple layers of high-tensile synthetic cord.

Fuel Hose 10 Bar Overview

Fuel Hose 10 Bar is a softwall rubber hose listed for low-pressure transfer of petroleum products in fuel-line systems. The published construction uses an NBR blend tube, black NBR/PVC cover and high-tensile synthetic yarn reinforcement.

XLPE Chemical Delivery Hose 16 Bar Overview

XLPE Chemical Delivery Hose 16 Bar is a softwall hose listed for delivery of a range of chemicals. Its published construction uses an XLPE tube, green EPDM blend cover, multiple layers of high-tensile synthetic cord and an embedded antistatic copper wire.

Water Suction Hose 20 Bar Overview

Water Suction Hose 20 Bar is a hardwall rubber hose listed for suction of water and non-corrosive fluids in agricultural, industrial and general transfer duties. Its helix-wire-supported construction helps the hose resist collapse under suction.

Sandblasting Hose 10 Bar Overview

Sandblasting Hose 10 Bar is a softwall abrasion-resistant hose listed for delivery of sand and cast-steel shot. Selection must match the abrasive, hose size, pressure, temperature, couplings, static-control requirements and blasting equipment.

• Tube: antistatic black NR blend with high abrasion resistance.

Water Discharge Hose 10 Bar Overview

Softwall rubber hose for transfer of water and non-corrosive liquids in construction, industry and agriculture. Confirm fluid, size, pressure, temperature, fittings and routing.

• Tube: black NR blend.
• Cover: black NR blend, abrasion- and weather-resistant.

General purpose hot water designed for automotive heating systems.

Tube: Black color of EPDM compound.
Cover: Black color of EPDM compound. Heat, abrasion and weather resistant.
Reinforcement: High tensile synthetic yarn
Temperature: -30°C to +100°C
Safety Factor: 3:1

Softwall hose suitable for handling wide range of chemical, food, petroleum products and oils.

Tube: Translucent UHMWPE. Aggressive chemical and acid resistant.
Cover: Blue color of EPDM blend compound. Chemical, abrasion and ozone resistant
Reinforcement: Multiple layers of high tensile synthetic cord.

Versatile industrial hose designed for a wide range of applications, including industrial and agricultural services, compressor lines, hot air and water transfer, low-pressure spraying, and light chemical handling. Optional anti-static copper wire.

Tube: Black color of EPDM compound. Heat and chemical resistant.

Softwall hose used as sleeves for cooling electrical cables in automatic welding systems.

Tube: White color of EPDM compound.
Cover: Black color of Neoprene blend compound. Flame retardant, electrical resistant, abrasion and weather resistant.
Reinforcement: Multiple layers of high tensile synthetic cord and fiber glass cloth.

Softwall hose ideal for heavy duty compressed air with light traces of oil mist, for civil engineering in road constructions, quarries, mines and general industries usage.

Tube: Black color of SBR compound,
Cover:Black color of SBR blend compound. Abrasion and weather resistant.
Reinforcement: High tensile synthetic yarn.

Medium duty air hose for transferring of compressed air in construction and general industry applications.

Tube: Black color of SBR/NR compound.
Cover: Black color of SBR/EPDM blend compound.