Flexible Industrial Hose

PVC F-Type Suction Hose is a medium-duty PVC hose reinforced with a continuous PVC helix for selected suction and discharge applications. The hose size, conveyed material, temperature, pressure or vacuum, fittings and installation conditions must be confirmed before use.

PVC 弹簧增强软管适用于工厂、农业及工程作业中的特定水、油、粉末及一般物料输送应用。在使用前，必须根据实际输送介质、温度、压力或真空条件、软管结构、尺寸、接头及安装条件进行确认。

该产品是一种采用弹簧增强结构的柔性 PVC

Fastul R1AT Hydraulic Hose Overview

Fastul R1AT hydraulic hose is a single-wire-reinforced hose for selected hydraulic fluid-power applications. The existing product information identifies DIN EN 853 1SN, a synthetic-rubber tube, one layer of high-tensile steel-wire reinforcement and an abrasion- and ozone-resistant synthetic-rubber cover.

Fastul R2AT Hydraulic Hose Overview

Fastul R2AT hydraulic hose is a two-wire-reinforced hose for selected hydraulic fluid-power applications. The existing product information identifies DIN EN 853 2SN, a synthetic-rubber tube, two layers of high-tensile steel-wire reinforcement and an abrasion- and ozone-resistant synthetic-rubber cover.

High Pressure Jack Hose Overview

High Pressure Jack Hose is listed for compact high-pressure hydraulic lines used with jack and lifting equipment. The published product information identifies a 700 bar application reference, a polyester elastomer inner tube and a black polyurethane cover.

20 Bar 氮气软管概述

20 Bar 氮气软管是一种挤出式软壁橡胶软管，标示用于输送氮气或天然气。其公开结构采用 NBR/SBR 混合胶内管、黄色 NBR/PVC/SBR 混合胶外覆层，以及高强度合成纱线增强层。气体输送应用在使用前必须确认确切的软管尺寸、气体成分、压力、温度、接头及现场操作程序。

• 内管：黑色 NBR/SBR 混合胶料，标示具有耐油性能。
• 外覆层：黄色 NBR/PVC/SBR 混合胶料，标示具有耐油、耐磨损及耐候性能。
• 增强层：高强度合成纱线。
• 公开温度范围：-30°C 至 +70°C。
• 公开安全系数：3:1。

LPG Hose 20 Bar Overview

LPG Hose 20 Bar is a product listing in Advtech Engineering’s gas hose category. The original description does not publish the exact tube, reinforcement, cover, temperature range, pressure table, standards or approved LPG composition.

20 Bar 重型空气软管概述

20 Bar 重型空气软管适用于采矿、船厂、土木工程及建筑行业中的压缩空气和水输送作业。其公开结构采用 SBR 混合胶内管、黄色 EPDM 混合胶外覆层及多层高强度合成纤维帘线。最终选型必须与软管尺寸、压力循环、输送介质、温度、接头及实际现场条件相匹配。

• 内管：黑色 SBR 混合胶料，标示具有耐油雾性能。
• 外覆层：黄色 EPDM 混合胶料，标示具有耐磨损及耐候性能。
• 增强层：多层高强度合成纤维帘线。
• 公开温度范围：-25°C 至 +85°C。
• 公开安全系数：3:1。

20 Bar

Fuel Hose 10 Bar Overview

Fuel Hose 10 Bar is a softwall rubber hose listed for low-pressure transfer of petroleum products in fuel-line systems. The published construction uses an NBR blend tube, black NBR/PVC cover and high-tensile synthetic yarn reinforcement.

XLPE Chemical Delivery Hose 16 Bar Overview

XLPE Chemical Delivery Hose 16 Bar is a softwall hose listed for delivery of a range of chemicals. Its published construction uses an XLPE tube, green EPDM blend cover, multiple layers of high-tensile synthetic cord and an embedded antistatic copper wire.

Water Suction Hose 20 Bar Overview

Water Suction Hose 20 Bar is a hardwall rubber hose listed for suction of water and non-corrosive fluids in agricultural, industrial and general transfer duties. Its helix-wire-supported construction helps the hose resist collapse under suction.

Sandblasting Hose 10 Bar Overview

Sandblasting Hose 10 Bar is a softwall abrasion-resistant hose listed for delivery of sand and cast-steel shot. Selection must match the abrasive, hose size, pressure, temperature, couplings, static-control requirements and blasting equipment.

• Tube: antistatic black NR blend with high abrasion resistance.

Water Discharge Hose 10 Bar Overview

Softwall rubber hose for transfer of water and non-corrosive liquids in construction, industry and agriculture. Confirm fluid, size, pressure, temperature, fittings and routing.

• Tube: black NR blend.
• Cover: black NR blend, abrasion- and weather-resistant.

通用型热水软管，专为汽车加热系统中的热水输送而设计。

内管：黑色 EPDM 胶料。
外覆层：黑色 EPDM 胶料。耐热、耐磨损及耐候。
增强层：高强度合成纤维纱线
温度： -30°C 至 +100°C
安全系数：3:1

软壁软管适用于输送多种化学品、食品、石油产品及油类。

内管：半透明 UHMWPE。耐强腐蚀性化学品及酸性介质。
外覆层：蓝色 EPDM 混合胶料。耐化学品、耐磨损及耐臭氧。
增强层：多层高强度合成纤维帘线，并嵌入防静电铜线。
温度：-30°C 至 +93°C（120°C，持续 30 分钟）

Versatile industrial hose designed for a wide range of applications, including industrial and agricultural services, compressor lines, hot air and water transfer, low-pressure spraying, and light chemical handling. Optional anti-static copper wire.

Tube: Black color of EPDM compound. Heat and chemical resistant.

Softwall hose used as sleeves for cooling electrical cables in automatic welding systems.

Tube: White color of EPDM compound.
Cover: Black color of Neoprene blend compound. Flame retardant, electrical resistant, abrasion and weather resistant.
Reinforcement: Multiple layers of high tensile synthetic cord and fiber glass cloth.

Softwall hose ideal for heavy duty compressed air with light traces of oil mist, for civil engineering in road constructions, quarries, mines and general industries usage.

Tube: Black color of SBR compound,
Cover:Black color of SBR blend compound. Abrasion and weather resistant.
Reinforcement: High tensile synthetic yarn.

Medium duty air hose for transferring of compressed air in construction and general industry applications.

Tube: Black color of SBR/NR compound.
Cover: Black color of SBR/EPDM blend compound.