Hose Supplier | Hose Manufacturing | Supply Hose and Fittings | Hose Distributor Malaysia, Klang | Shah Alam | Kapar | Puchong | Rawang | Semenyih | Sungai Buloh | Kuala Lumpur | Selangor | Perak | Ipoh | Pahang | Kuantan | Kemaman | Kedah | Kelantan | Malacca | Labuan | Sabah | Sarawak | Negeri Sembilan | Johor

PU Ducting Hose is intended for suction and conveying of selected abrasive solids, dust, powders, wood chips and granules, as well as ventilation and industrial-vacuum applications. Particle characteristics, airflow, vacuum, temperature, static risk and installation conditions must be reviewed before selection.

PVC Ducting Hose is a lightweight flexible hose intended for selected ventilation, air-conveyance, fume-extraction and dust-collection applications. The conveyed air or particles, temperature, vacuum, chemical exposure, hose size and installation route must be reviewed before selection.

Camlock Coupling Malaysia solutions from Advtech Engineering provide a practical cam-and-groove connection for transferring liquids and other compatible media through industrial hose assemblies. This page covers the current listed material options, size range, selection points and safe enquiry information for buyers comparing camlock fittings in Malaysia.

Power Rewind Hose Reel Series 1000 Malaysia is a compact industrial reel range for managing compatible hose by manual crank or powered rewind. Electric, hydraulic or compressed-air motor drive configurations are listed, with the motor installed outside the reel. Series 1000 reels are supplied without hose, so the hose assembly is selected separately for the application.

Viton Camlock Gasket Malaysia is an industrial green FKM fluorocarbon seal for compatible cam-and-groove couplings. The gasket sits inside the female camlock coupler and helps form a seal against the mating adapter. Correct material, size and condition are essential for reliable service.

Rubber Camlock Gasket Malaysia is a nitrile (Buna-N) replacement seal for compatible cam-and-groove couplings. Installed inside the female coupler, the gasket is compressed by the mating adapter to support a sealed hose connection.

The current product is listed as commercial-grade nitrile / Buna-N.

Industrial Pressure Gauge Malaysia solutions from Advtech Engineering support local pressure indication on compatible pipelines, pumps, compressors, hydraulic systems, pneumatic equipment and process installations. Gauge selection must match the pressure range, media, temperature, connection, environment and required accuracy.

PTFE Expansion Joint is used in piping systems where thermal movement, vibration or installation misalignment must be considered together with chemical compatibility. The joint must be selected from the actual media, temperature, pressure, movement, pipe size, connections, cycle requirements and system support arrangement.

Convoluted PTFE Hose with SS316 Flared End Flange combines a flexible convoluted PTFE hose with SS316 flanged end connections. The complete assembly must be selected from the exact media, concentration, temperature, pressure or vacuum, flange standard, movement and installation conditions.

Stainless Steel 2-Piece Full Bore Ball Valve Overview

This stainless steel 2-piece full bore ball valve is a manually operated isolation valve for industrial piping. Its two-piece body, lever handle and straight-through flow path make it a practical option where buyers need compact shut-off control with threaded end connections.

Stainless Steel Expansion Bellow 40 Bar is intended for high-pressure piping projects where thermal movement, vibration and mechanical loads must be evaluated. The 40 bar designation does not by itself confirm suitability; pressure at temperature, movement, cycle life, flange rating, media and piping-support forces must all be reviewed.

Spring Rewind ST-Series Hose Reel Overview

The ST-Series is a spring rewind hose reel for organised hose storage and controlled retrieval in industrial work areas. It may be considered for air, water, lubrication and selected hydraulic duties when the complete reel, hose, swivel, seal and connection configuration has been checked against the operating conditions.

Hammer Union FIG 206 Overview

Hammer Union FIG 206 is a quick make-up union used to connect compatible piping or fluid-handling equipment where regular assembly and disassembly may be required. The existing product information identifies a forged-steel construction, butt-weld ends and a published working pressure up to 2,000 psi (2M).

Hydraulic Quick Release Coupling Overview

A hydraulic quick release coupling allows compatible hose and equipment lines to be connected or disconnected without dismantling threaded joints each time.

Fastul R1AT Hydraulic Hose Overview

Fastul R1AT hydraulic hose is a single-wire-reinforced hose for selected hydraulic fluid-power applications. The existing product information identifies DIN EN 853 1SN, a synthetic-rubber tube, one layer of high-tensile steel-wire reinforcement and an abrasion- and ozone-resistant synthetic-rubber cover.

Fastul 4SH Hydraulic Hose Overview

Fastul 4SH hydraulic hose is a four-wire-spiral hose for selected high-pressure hydraulic applications. The existing product information identifies DIN EN 856 4SH, a synthetic-rubber tube, four spiral layers of high-tensile steel wire and an abrasion- and ozone-resistant synthetic-rubber cover.

Fastul R2AT Hydraulic Hose Overview

Fastul R2AT hydraulic hose is a two-wire-reinforced hose for selected hydraulic fluid-power applications. The existing product information identifies DIN EN 853 2SN, a synthetic-rubber tube, two layers of high-tensile steel-wire reinforcement and an abrasion- and ozone-resistant synthetic-rubber cover.

KC Nipple Overview

A KC nipple is an industrial hose fitting used to connect compatible hose, piping or equipment interfaces. Advtech Engineering supplies KC nipple options for enquiries in Malaysia, subject to confirmation of hose size, end geometry, thread, material, pressure, media and the required retention method.

High Pressure Jack Hose Overview

High Pressure Jack Hose is listed for compact high-pressure hydraulic lines used with jack and lifting equipment. The published product information identifies a 700 bar application reference, a polyester elastomer inner tube and a black polyurethane cover.

Bulk Material Suction Hose 10 Bar Overview

Bulk Material Suction Hose 10 Bar is designed for suction and transfer duties involving dry materials such as cement, gravel, grain, animal feed and sand. The published construction combines an abrasion-resistant tube, textile reinforcement, helix wire support and an embedded antistatic copper wire.

LPG Hose 20 Bar Overview

LPG Hose 20 Bar is a product listing in Advtech Engineering’s gas hose category. The original description does not publish the exact tube, reinforcement, cover, temperature range, pressure table, standards or approved LPG composition.

XLPE Chemical Delivery Hose 16 Bar Overview

XLPE Chemical Delivery Hose 16 Bar is a softwall hose listed for delivery of a range of chemicals. Its published construction uses an XLPE tube, green EPDM blend cover, multiple layers of high-tensile synthetic cord and an embedded antistatic copper wire.

Oil Discharge Hose 10 Bar Overview

Oil Discharge Hose 10 Bar is a softwall rubber hose listed for transfer of oil and petroleum-based products. The existing product information refers to products with aromatic content up to 50% for fuel-connector service.