Share:
Water Discharge Hose 10 Bar
Water Discharge Hose 10 Bar Overview
Softwall rubber hose for transfer of water and non-corrosive liquids in construction, industry and agriculture. Confirm fluid, size, pressure, temperature, fittings and routing.
Published Construction
- Tube: black NR blend.
- Cover: black NR blend, abrasion- and weather-resistant.
- Reinforcement: multiple high-tensile synthetic cord layers.
- Temperature: -20°C to +70°C.
- Safety factor: 3:1.
Understanding the 10 Bar Title
Confirm size-specific working pressure, pump shut-off pressure, surges and assembly method.
The Lowest-Rated Component Governs
Hose, coupling, clamp, gasket and adapter must be rated as one assembly.
Fluid Compatibility
State water treatment chemicals, solids, salinity, oils or contaminants. “Non-corrosive” does not approve every mixture.
Potable Water Needs Evidence
Do not assume drinking-water or food-contact approval without documentation for the exact hose.
Discharge and Pump Conditions
This is a discharge hose; do not use for suction unless specifically approved. Provide pump type, flow and pressure cycle.
Connections and Routing
Confirm bore, length, fitting and clamp method. Avoid twist, kinks, sharp edges, traffic and excessive bend.
Allow for Pressurised Movement
Support the hose without loading fittings and keep personnel clear during initial pressurisation.
Inspection and Safety
Inspect for cuts, soft spots, exposed reinforcement, leakage and loose fittings. Isolate the pump and release pressure before handling.
Information Required for Review
- Fluid and additives
- Working, shut-off and surge pressure
- Flow, bore and length
- Temperature
- Connections and clamps
- Routing and abrasion
- Duty cycle
- Testing documents
Send these details to Advtech Engineering before installation.
Inquiry - Water Discharge Hose 10 Bar
