Hose Supplier | Hose Manufacturing | Supply Hose and Fittings | Hose Distributor Malaysia

Cement Discharge Hose 10 Bar Overview

This cement discharge hose is designed for transferring dry cement, pebble lime and selected abrasive dry materials. The product title identifies a 10 bar pressure class, while the existing construction information lists an abrasion-resistant SBR tube and cover with multiple layers of high-tensile synthetic cord reinforcement.

Fastul R1AT Hydraulic Hose Overview

Fastul R1AT hydraulic hose is a single-wire-reinforced hose for selected hydraulic fluid-power applications. The existing product information identifies DIN EN 853 1SN, a synthetic-rubber tube, one layer of high-tensile steel-wire reinforcement and an abrasion- and ozone-resistant synthetic-rubber cover.

Fastul R8 热塑性软管概述

Fastul R8 是一种热塑性液压软管，适用于特定的高压流体动力应用，尤其适合需要紧凑、轻量化软管结构的场合。现有产品资料显示，该软管符合 SAE 100R8 / EN 855 R8 标准，采用耐油尼龙热塑性内管、两层高强度合成纤维编织增强层，以及具有耐磨性能的聚氨酯外覆层。

产品资料列明 SAE 100R8 和 EN 855

Fastul 4SH Hydraulic Hose Overview

Fastul 4SH hydraulic hose is a four-wire-spiral hose for selected high-pressure hydraulic applications. The existing product information identifies DIN EN 856 4SH, a synthetic-rubber tube, four spiral layers of high-tensile steel wire and an abrasion- and ozone-resistant synthetic-rubber cover.

Fastul R2AT Hydraulic Hose Overview

Fastul R2AT hydraulic hose is a two-wire-reinforced hose for selected hydraulic fluid-power applications. The existing product information identifies DIN EN 853 2SN, a synthetic-rubber tube, two layers of high-tensile steel-wire reinforcement and an abrasion- and ozone-resistant synthetic-rubber cover.

KC Nipple Overview

A KC nipple is an industrial hose fitting used to connect compatible hose, piping or equipment interfaces. Advtech Engineering supplies KC nipple options for enquiries in Malaysia, subject to confirmation of hose size, end geometry, thread, material, pressure, media and the required retention method.

High Pressure Jack Hose Overview

High Pressure Jack Hose is listed for compact high-pressure hydraulic lines used with jack and lifting equipment. The published product information identifies a 700 bar application reference, a polyester elastomer inner tube and a black polyurethane cover.

STS 型复合软管产品概述

STS 型复合软管是 Advtech Engineering 复合软管系列中的一种产品型号。由于现有产品描述并未公布其确切的层状材料、钢丝结构、压力、温度或介质兼容性，因此不应仅凭 Type-STS 型号代码来确认软管是否适用于特定工况。软管选型必须根据实际输送介质、工作条件、端部连接方式，以及经过验证的制造商资料或批次资料进行确认。

复合软管通常由多层薄膜、织物及支撑层组成，但不同产品所采用的材料及结构排列可能有所不同。必须针对实际供应的 Type-STS

Bulk Material Suction Hose 10 Bar Overview

Bulk Material Suction Hose 10 Bar is designed for suction and transfer duties involving dry materials such as cement, gravel, grain, animal feed and sand. The published construction combines an abrasion-resistant tube, textile reinforcement, helix wire support and an embedded antistatic copper wire.

20 Bar 氮气软管概述

20 Bar 氮气软管是一种挤出式软壁橡胶软管，标示用于输送氮气或天然气。其公开结构采用 NBR/SBR 混合胶内管、黄色 NBR/PVC/SBR 混合胶外覆层，以及高强度合成纱线增强层。气体输送应用在使用前必须确认确切的软管尺寸、气体成分、压力、温度、接头及现场操作程序。

• 内管：黑色 NBR/SBR 混合胶料，标示具有耐油性能。
• 外覆层：黄色 NBR/PVC/SBR 混合胶料，标示具有耐油、耐磨损及耐候性能。
• 增强层：高强度合成纱线。
• 公开温度范围：-30°C 至 +70°C。
• 公开安全系数：3:1。

LPG Hose 20 Bar Overview

LPG Hose 20 Bar is a product listing in Advtech Engineering’s gas hose category. The original description does not publish the exact tube, reinforcement, cover, temperature range, pressure table, standards or approved LPG composition.

XLPE Chemical Delivery Hose 16 Bar Overview

XLPE Chemical Delivery Hose 16 Bar is a softwall hose listed for delivery of a range of chemicals. Its published construction uses an XLPE tube, green EPDM blend cover, multiple layers of high-tensile synthetic cord and an embedded antistatic copper wire.

Oil Discharge Hose 10 Bar Overview

Oil Discharge Hose 10 Bar is a softwall rubber hose listed for transfer of oil and petroleum-based products. The existing product information refers to products with aromatic content up to 50% for fuel-connector service.

PVC Layflat Hose Overview

PVC Layflat Hose is a lightweight, flexible discharge hose commonly used for water delivery, pump discharge, irrigation and general site dewatering. It stores flat when not pressurised and is available in cut lengths or assemblies. Final selection must match the hose size, working pressure, temperature, fluid, fittings and routing conditions.

硅胶风管软管适用于特定的热空气、干燥烟气、废气及通风应用，需要使用具有高温耐受性能的柔性风管。在选型之前，必须综合评估空气或气体成分、温度变化、气流量、真空度、软管尺寸及安装环境。

凸轮锁式接头 DP 型概述

凸轮锁式接头 DP 型是一种防尘塞，用于在软管或管道连接未使用时封闭兼容的凸轮锁式母接头，以保护敞开的接口免受污垢及碎屑侵入。选型前必须确认准确的尺寸、材质、配套系列、密封垫配置及压力条件。

• 所列材质：SS316 不锈钢、黄铜、铝及聚丙烯。
• 公开尺寸范围：1/2 英寸至 6 英寸。
• 公开最高工作压力：150 psi；必须根据具体材质、尺寸、制造商及配置进行确认。

DP

Camlock Part DC Overview

Camlock Part DC is a dust cap used to close a compatible male camlock adapter when a hose or pipeline connection is not in use. It helps protect the open adapter from dirt and debris. The exact size, material, mating series, gasket and pressure conditions must be confirmed before selection.

Water Suction Hose 20 Bar Overview

Water Suction Hose 20 Bar is a hardwall rubber hose listed for suction of water and non-corrosive fluids in agricultural, industrial and general transfer duties. Its helix-wire-supported construction helps the hose resist collapse under suction.

Camlock Part F Overview

Camlock Part F is commonly configured with a male camlock adapter end and a male threaded connection. It connects a compatible female camlock coupler to threaded equipment or pipework. The exact thread standard, size, material, media and pressure conditions must be confirmed before selection.

Camlock Part E Overview

Camlock Part E is commonly configured with a male camlock adapter end and a hose shank. It connects a compatible female camlock coupler to a flexible hose. The exact hose bore, shank profile, attachment method, material, media and pressure conditions must be confirmed before assembly.

Sandblasting Hose 10 Bar Overview

Sandblasting Hose 10 Bar is a softwall abrasion-resistant hose listed for delivery of sand and cast-steel shot. Selection must match the abrasive, hose size, pressure, temperature, couplings, static-control requirements and blasting equipment.

• Tube: antistatic black NR blend with high abrasion resistance.

Camlock Part D Overview

Camlock Part D is commonly configured with a female camlock coupler and a female threaded connection. It connects a compatible male camlock adapter to threaded equipment or pipework. Confirm the thread standard, camlock series, size, material, gasket, media and pressure before selection.

Water Discharge Hose 10 Bar Overview

Softwall rubber hose for transfer of water and non-corrosive liquids in construction, industry and agriculture. Confirm fluid, size, pressure, temperature, fittings and routing.

• Tube: black NR blend.
• Cover: black NR blend, abrasion- and weather-resistant.