Klang | Shah Alam | Kapar | Puchong | Rawang | Semenyih | Sungai Buloh | Kuala Lumpur | Selangor | Perak | Ipoh | Pahang | Kuantan | Kemaman | Kedah | Kelantan | Malacca | Labuan | Sabah | Sarawak | Negeri Sembilan | Johor

PU Ducting Hose is intended for suction and conveying of selected abrasive solids, dust, powders, wood chips and granules, as well as ventilation and industrial-vacuum applications. Particle characteristics, airflow, vacuum, temperature, static risk and installation conditions must be reviewed before selection.

PVC Ducting Hose is a lightweight flexible hose intended for selected ventilation, air-conveyance, fume-extraction and dust-collection applications. The conveyed air or particles, temperature, vacuum, chemical exposure, hose size and installation route must be reviewed before selection.

Camlock Coupling Malaysia solutions from Advtech Engineering provide a practical cam-and-groove connection for transferring liquids and other compatible media through industrial hose assemblies. This page covers the current listed material options, size range, selection points and safe enquiry information for buyers comparing camlock fittings in Malaysia.

Power Rewind Hose Reel Series 1000 Malaysia is a compact industrial reel range for managing compatible hose by manual crank or powered rewind. Electric, hydraulic or compressed-air motor drive configurations are listed, with the motor installed outside the reel. Series 1000 reels are supplied without hose, so the hose assembly is selected separately for the application.

Stainless Steel Camlock Flange Adapter Malaysia connects a cam-and-groove hose coupling to a compatible flanged pipeline or equipment connection. The current range lists Type FLA, with a male camlock adapter and flange, and Type FLD, with a female camlock coupler and flange.

Data Center Cooling Hose Malaysia is intended for project teams assessing flexible stainless steel hose assemblies for liquid-cooling infrastructure.

Viton Camlock Gasket Malaysia is an industrial green FKM fluorocarbon seal for compatible cam-and-groove couplings. The gasket sits inside the female camlock coupler and helps form a seal against the mating adapter. Correct material, size and condition are essential for reliable service.

Rubber Camlock Gasket Malaysia is a nitrile (Buna-N) replacement seal for compatible cam-and-groove couplings. Installed inside the female coupler, the gasket is compressed by the mating adapter to support a sealed hose connection.

The current product is listed as commercial-grade nitrile / Buna-N.

Industrial Pressure Gauge Malaysia solutions from Advtech Engineering support local pressure indication on compatible pipelines, pumps, compressors, hydraulic systems, pneumatic equipment and process installations. Gauge selection must match the pressure range, media, temperature, connection, environment and required accuracy.

Stainless Steel Flexible Hose with Both End SS316 Camlock combines a corrugated stainless steel flexible hose with SS316 cam-and-groove couplings at both ends. The assembly is intended for applications requiring a detachable hose connection, subject to confirmation of the media, temperature, pressure, gasket, camlock size and installation conditions.

Stainless Steel Flexible Hose with Both End Union is designed for industrial fluid or gas-transfer connections that require a detachable union at each end. The complete assembly must be selected from the actual media, temperature, pressure, hose material, union type, sealing arrangement, length and installation conditions.

PTFE 膨胀节适用于必须同时考虑热位移、振动或安装偏差及化学兼容性的管道系统。选型必须根据实际输送介质、温度、压力、位移、管道尺寸、连接方式、循环要求及系统支撑配置进行。

PTFE

Convoluted PTFE Hose with SS316 Flared End Flange combines a flexible convoluted PTFE hose with SS316 flanged end connections. The complete assembly must be selected from the exact media, concentration, temperature, pressure or vacuum, flange standard, movement and installation conditions.

SS304 Jacketed Hose is intended for industrial transfer processes where the temperature of the conveyed media must be managed through a separate heating or cooling jacket. Both the process circuit and jacket circuit require independent review of media, temperature, pressure, connections and safety requirements.

Stainless Steel 2-Piece Full Bore Ball Valve Overview

This stainless steel 2-piece full bore ball valve is a manually operated isolation valve for industrial piping. Its two-piece body, lever handle and straight-through flow path make it a practical option where buyers need compact shut-off control with threaded end connections.

Stainless Steel Expansion Bellow 40 Bar is intended for high-pressure piping projects where thermal movement, vibration and mechanical loads must be evaluated. The 40 bar designation does not by itself confirm suitability; pressure at temperature, movement, cycle life, flange rating, media and piping-support forces must all be reviewed.

Stainless Steel Flexible Hose with Fixed & Swivel Flange is designed for industrial piping connections where flange alignment, vibration, movement or thermal expansion must be considered. The complete hose assembly must be selected from the actual media, temperature, pressure, flange standard, length and installation route.

铜盘管概述

Advtech Engineering

SS316 Stainless Steel Tubing Overview

SS316 stainless steel tubing is used in industrial piping, instrumentation and fabrication where corrosion resistance and material traceability may be important.

The Hose Bun is a durable and reliable industrial hose support designed to protect hoses, cables, and flexible pipelines from abrasion, sharp edges, and ground contact. Made from high-quality, UV-resistant polymer material, Hose Bun prevents hose kinking, reduces wear, and extends service life in harsh industrial environments.

Spring Rewind ST-Series Hose Reel Overview

The ST-Series is a spring rewind hose reel for organised hose storage and controlled retrieval in industrial work areas. It may be considered for air, water, lubrication and selected hydraulic duties when the complete reel, hose, swivel, seal and connection configuration has been checked against the operating conditions.

SS316 Instrumentation Fittings Overview

SS316 instrumentation fittings connect tubing within measurement, sampling, control and fluid-handling systems. Advtech Engineering supplies fitting configurations for industrial enquiries in Malaysia and can review the required tube size, connection form, material, service conditions and documentation before quotation.

Hammer Union FIG 206 Overview

Hammer Union FIG 206 is a quick make-up union used to connect compatible piping or fluid-handling equipment where regular assembly and disassembly may be required. The existing product information identifies a forged-steel construction, butt-weld ends and a published working pressure up to 2,000 psi (2M).

Hydraulic Quick Release Coupling Overview

A hydraulic quick release coupling allows compatible hose and equipment lines to be connected or disconnected without dismantling threaded joints each time.